Used Tsudakoma Water Jet Loom

Used Tsudakoma Water jet loom

"ZW8100" is based on ultra-high-speed performance, and seeks to optimize the design of the frame structure, beating-up mechanism, and shedding device. At the same time, it is equipped with the newly developed short-spacing nozzle to further improve the weft insertion performance. As a result, the high-speed performance surpassed the original loom by more than 10%.

Air jet loom

Second-Hand Rapier Loom

Through the strong frame structure, strengthened warp let-off, and shortened weaving path, the beating-up performance is greatly improved, and the high-speed and high-quality are realized at a higher level. In addition, the use of PSS-W parking gear prevention control can effectively reduce the parking gear.

Air Jet Loom

Equipped with Weave Navigation® System, and give full consideration to operability. With the Navi keyboard, almost all settings can be done quickly and easily. Compared with the original loom, the warp position line is reduced by 40mm, and the design is easy to operate. Furthermore, after the yarn stopped by the loom is repaired, it can start to automatically align the weaving, and exert superior operability.

Water Jet Loom

Excellent high-speed tracking performance, equipped with active yarn separation and feeding device, so that thick yarns can also be simply stored and unwinded, which can correspond to various types of yarns. Moreover, according to the length of the weft insertion, the diameter of the drum can be changed with one touch.

electronic jacquard machine

Improvement of versatility. By shortening the nozzle distance, the difference in the weft insertion state between the first nozzle and the second nozzle will be reduced, and the weft insertion time can be extended. Even if the loom is running at high speed, stable weft insertion can be achieved through the use of double stabilizers. Improve condensing.